In order to achieve maximum security, Windows 10 requires digitally signed drivers. This is usually a good feature if you’re concerned about your safety, but sometimes you need to install drivers that aren’t digitally signed, and today we’re going to show you how to do that.
64-bit versions of Windows require that you install digitally signed drivers. Digitally signed drivers come with an electronic fingerprint that guaranties that the driver was created by the hardware manufacturer and that it hasn’t been modified since it was created. Thanks to driver signature enforcement you’ll be sure that your drivers are authentic and not altered by a malicious third party. This feature is great if you want to protect your PC, but some manufacturers don’t make digitally signed drivers and this can lead to all sorts of problems.
If your drivers aren’t digitally signed you won’t be able to install them at all which means that you won’t be able to use the hardware that is associated with them. This is a big problem, but fortunately you can disable driver signature enforcement with ease.
Solution 1 – Change the Startup settings
This is the simplest way to disable driver signature enforcement on Windows 10, but bear in mind that this method will only disable driver signature temporarily. After you restart your computer driver signature enforcement will automatically turn itself on. To disable driver signature enforcement do the following:
- Press and hold the Shift key on your keyboard and click the Restart button.
- Choose Troubleshoot > Advanced options > Startup Settings and click the Restart button.
- When your computer restarts you’ll see a list of options. Press F7 on your keyboard to select Disable driver signature enforcement.
- Your computer will now restart and you’ll be able to install unsigned drivers.
Bear in mind that this method only temporarily disables driver signature enforcement, so be sure to install all the unsigned drivers as soon as you can.
Solution 2 – Use Command Prompt
Previous solution will only disable driver signature enforcement temporarily, but if you want to disable it permanently, follow these steps:
- Press Windows Key + X to open Power User Menu. Select Command Prompt (Admin) from the menu.
- Once the Command Prompt open, enter bcdedit.exe /set nointegritychecks on and press Enter.
- Optional: To enable driver signature enforcement back again, open the Command Prompt as administrator and enter bcdedit.exe /set nointegritychecks off.
Alternatively you can disable driver signature enforcement by using these steps:
- Start Command Prompt as administrator.
- When Command Prompt starts enter the following lines:
- Close Command Prompt and restart your PC.
- Optional: To enable driver signature enforcement open Command Prompt as administrator and enter the following:
Bear in mind that using this solution will disable driver signature enforcement permanently, thus making your computer somewhat vulnerable.
Driver signature enforcement is a useful feature that provides extra protection, but sometimes extra protection can cause problems when installing certain drivers. We hope that you now understand how driver signature enforcement works and how to disable it in Windows 10.